top of page

How to Clean Porcelain Tile Floor?

How to Clean Porcelain Tile Floor?

If there is one type of tile that’s the most durable, it would be porcelain. Tile floors made up of porcelain are great at resisting stains and moisture while also being easy to maintain. 

However, to keep your porcelain tile floor stay tip-tip for long, a cleaning routine is a must. And knowing how to do it right is crucial too.

So, if you are looking for the correct way to clean and care for your porcelain floor, this blog is for you. We’ll discuss an easy way for porcelain tile floor cleaning to keep it looking shiny.

Easy Ways To Clean Your Porcelain Tile Floor

1. Daily Surface Cleaning

Your floor collects dirt on a daily basis. One of the best ways to clean it is to ensure a regular surface cleaning. Use a soft-bristled brush or a vacuum cleaner to sweep the dry debris and loose grit on your tile floor. This will keep the surface clean while also helping you maintain tile floors in high-traffic areas

2. Spot Cleaning

Although porcelain tiles are stain-resistant, moisture lingering for a long time can still enter the minute pores, causing staining. So, prefer to attend to the spills as soon as they occur.

Use a microfiber cloth dipped in water to wipe away the stain before a dry wipe. If the stain is stubborn, use a mixture of equal parts of white vinegar and water to clean it. 

Be sure to give it a final plain water rinse before wiping it dry. 

3. Routine Mopping

Besides daily sweeping and prompt spot cleaning, regular tile cleaning is important. Prefer to mop your porcelain tile floors once a week. Begin with sweeping the dry dust before mopping.

Then, add and mix a few drops of a mild, pH-neutral dish soap with a bucket of plain water. For routine mopping, this slightly soapy water mixture is sufficient.

Dampen a microfiber mop into this mixture and clean your porcelain floor thoroughly. Avoid oversaturating the tile, especially when you have unglazed porcelain. 

Once done, mop with plain water to clean soap residue and dry mop immediately to avoid streaks to form. 

4. Deep Cleaning

If your porcelain tile floors need a bit deeper cleanup than routine mopping, use a vinegar mixture for that. Add ¼ th cup of white distilled vinegar into a gallon of warm water. 

Then, with a clean microfiber mop, dipped and wrung, mop your floors properly. The slightly acidic nature of vinegar along with warm water will dislodge dirt effectively. 

Clean the porcelain tile floor in sections and use water sparingly. Once you’ve mopped it all, give it a clean-water mop like in the previous step. This will prevent any residual streaks before you dry it with a dry mop or cloth.

Note: If you prefer, you can use a commercial tile cleaning product to deep clean your porcelain tiles. Make sure to choose a mild and porcelain-safe (color-less & oil-free) cleaner which does not have harsh chemicals. Test the product and follow the usage instructions to clean well. 

5. Grout Cleaning

Attend the grout lines separately if they are dirty. Mopping along might not be enough to clean them. To clean the grout between your porcelain tiles, you can use a small brush.

Apply a mixture of equal parts of baking soda powder and water. Let it sit to break down the dirt and stains on the grout before scrubbing it with the brush. Clean it away thoroughly with a cloth or a mop once done. 


Cleaning porcelain tile floor is easy and hassle free when done properly. With the above steps, you can tackle surface cleaning, attend to spills and stains and ensure a deep cleanup with mopping. Just make sure you test the cleaner before use, avoid overwetting, and maintain a regular cleaning regime for a long-lasting shine.

Recent Posts

See All


bottom of page